| Customization: | Available |
|---|---|
| Logo Printing: | with Logo Printing |
| Installation Type: | Panel Mounting |
|
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The BRS-AM-109 Amplifier adopts an aluminum alloy shell, and the original imported high-performance components are used inside to accurately amplify the sensor output signal. The internal voltage and constant current conversion, impedance adaptation, linear compensation, temperature compensation, etc. The mechanical quantity is converted into standard current and voltage signal output, which can be switched to 0~10mA, 0~20mA, 4~20mA, 0~5v, 0~10v, 0~±5v, 0~±10v, and the four channels can be adjusted independently. It can be directly connected to the interface of automatic control equipment PLC, single chip microcomputer, upper computer terminal or computer network. With standard signal external zero adjustment, external gain adjustment function, input overvoltage protection, output short circuit protection.
1. Wide input range, 0.4-6mV/V can be matched with most strain sensors.
2. Strong load capacity, 16 350Ω sensors can be connected.
3. Using original imported electronic components, high response frequency, good long-term stability, and comprehensive accuracy of ±0.05% FS.
4. Input power reverse connection protection and output short circuit protection.
5. Power supply 18~30VDC (24VDC recommended) or 15~22VAC.
6. It is suitable for various strain sensors such as pressure, tension, torque and tension.
|
Specifications |
Technique |
|
Power supply |
DC18~30V |
|
Signal input range |
0.4~6mV/V |
|
Excitation voltage |
5VDC±2%,100mA |
|
Accuracy |
<0.05%FS |
|
Current output |
0~20mA/4~20mA |
|
Number of load cells |
Each channel drives 4pcs load cells 350Ω |
|
Dimensions |
149x98x25mm |
|
Temperature operating |
-30~60ºC |
|
Frequency response |
100HZ/5KHZ(option) |
|
Protection |
IP64 |
){kind=link}