RS232-RS485/422 Optoelectric Converter

• Customization: Available
• Logo Printing: with Logo Printing
• Installation Type: Panel Mounting
• Model NO.: BX001
• Display Type: Screen
• Accuracy Grade: 0.00001g
• IP Rating: IP65
• Certification: SGS
• Customized: Customized
• Combined Accuracy: 0.05%
• a / D Conversion Speed: 5000 Times/Sec(18bit)
• Measured Value Output Speed: 400Hz(Times / Sec)
• Output: 0-5V, 0-10V, 4-20mA
• Transport Package: Carton Packing
• Specification: 82*76*23.3mm
• Trademark: BRANS
• Origin: China
• Production Capacity: 1000PCS/Month

Product Description

1. Name: 

RS232-RS485/422 Optoelectric Converter(BX001)

2. Functions:
interface converters
opto isolation products
line drivers
repeaters & boosters
lighting & surge Protectors

3. Data sheet

nterface feature:	Port  compatible with EIA / TIA RS-232C, RS-485/RS-422 standard
Electrical Interface:	RS-232C interface DB9 hole connector, RS-422/RS-485 interface  four terminals,power interface two terminals
Transmission media:	Twisted pair or shielded wire
Working mode:	Asynchronous half-duplex or full-duplex asynchronous
Signal indication:	Three signal lights indicate TXD, RXD, and POWER
Isolation:	Isolation voltage 1500VRMS, 2000VDC continuous
Transfer rate:	115.2K BPS to 300M; 38.4K BPS to 2.4KM; 9600 BPS to 5KM
Degree of protection:	RS-232 interface +15 KV ESD protection, RS-422/RS-485 interface each 600W lightning surge protection
Transmission distance:	0-5 km  (115200-300BPS)
Operating environment:	-25 ° C to 70 ° C, relative humidity: 5% to 95%
Size:	115mmx72mmx25mm
Supply voltage:	DC9-36V
Mounting:	fixing holes
Ingress Protection:	Ip60

4. KEY FEATURES
A, the input range is wide, 0.4 ~ 6mV / V can be connected with most of the strain bridge sensor
B, the load capacity can be connected with four 350Ω sensor
C, the use of imported electronic components, high response frequency, long-term stability
Integrated accuracy of ± 0.05% FS
D, input power reverse polarity protection and output short circuit protection
E, power supply 16 ~ 30VDC (recommended 24VDC) or 12 ~ 24VAC
F, suitable for pressure tensile pressure torque tension and other strain bridge sensors

The analog sensor signal is amplified, filtered, converted by the analog-to-digital converter to digital. Digital measurement signal and then processed by the microprocessor, through the RS232 serial port transmission. The parameters are stored in the CPU, power loss is not lost.

If you need special data accqusition system, please let me know freely. We will do our best for this. 
bransensor.en.made-in-china.com