6 Axis Force Sensor with High Accuracy (B04XF)

• Customization: Available
• Transport Package: Exporting Cartons
• Trademark: BRANS
• Model NO.: B04XF
• Origin: China
• Production Capacity: 12232

Product Description

1. Introduction:
What is a Six-Axis Force/Torque Transducer?
A device that measures the outputting forces and torques from all three Cartesian coordinates (x, y, and z). A six-axis force/torque transducer is also known as a multi-axis force/torque transducer, multi-axis load cell, F/T sensor, or six-axis load cell.
 
The loads applied to a Brans sensor are quantified into six components. The diagram below shows the three forces and three moments that are measured as they are applied directly or indirectly (through an attached object) to the top surface of the sensor.
Forces Fx, Fy and Fz are the force components. The forces are named according to the axes of a conventional x, y, z-coordinate system. Each component is therefore looked at as positive or negative along the x, y and z axes. In the diagram, the arrows point toward the direction of positive or compressive force along each of the axes. Fx and Fy are the horizontal or shear force components. Looking at the connector, the Fx axis is oriented from right to left and the Fy axis is oriented from front to back away from the connector. Fz is the vertical force component and points down.
Moments Mx, My and Mz are the other three components. Moments are rotations around the same x, y and z axes and they follow the right hand rule.
Together the six components can be used to examine the complex forces being exerted upon the sensor.

This one can be modified or customized to meet your requirements. Similar to our entire multi-component load cell series, this model is manufactured in China and utilizes metal foil strain gauge technology.

The BRANS Multi-Axis Force/Torque Sensor system measures all six components of force and torque. It consists of a transducer, interface electronics and cabling.
Transducer
The compact and rugged monolithic transducer uses silicon strain gages to sense forces. The transducer's silicon strain gages provide high noise immunity and allow high overload protection, which is standard on all models.

2. Applications:  

• Mainly used for force control in milling or grinding machine, rototic polishing and other industrial measuring system, production of high accuracy components, assembling; Measuring and controlling for all directions

3. Product Highlights:

(1) The F/T transducer is extremely rugged and durable. All transducer models can withstand high overload.
(2) High signal-to-noise ratio:  provide a signal 75 times stronger than conventional foil gages. This signal is amplified resulting in near-zero noise distortion.
(3) Prompt delivery  of standard F/T models.
(4) Custom F/T transducers  can be designed and built to your specifications.
Application assistance  by experienced engineers.

4. Datasheet

Specifications	Technique
Rated output	0.5 mV/
Zero balance	±2%F.S.
Non‐linearity	0.5%F.S.
Hysteresis	0.5%F.S.
Repeatability	0.3%F.S.
Creep(30min)	0.1%F.S.
Temp.effect on output	0.03%F.S./10ºC
Temp.effect on zero	0.03%F.S./10ºC
Input impedance	350±3Ω
Output impedance	350±3Ω
Insulation	≥5000MΩ/100VDC
Recommended excitation	10V
Maximum excitation	15V
Compensated temp range	‐10~40ºC
Operation temp range	‐20~60ºC
Safe overload	150%F.S.
Ultimate overload	200%F.S.
Cable size	Φ5×3000mm
Weight approx.	0.8kg
Material	aluminum alloy
IP Class	IP66

 

MODEL	DESCRIPTION	CAPACITY				DIMENSTION(mm)			MASS(kg)
		FX, FY(N)	FZ(N)	MX,MY(Nm)	MZ(Nm)	OD	Height	ID
B0401F	6 Axi sensor	2700	5400	120	96	60	40	15	0.18
B0402F	6 Axi sensor	2700	5400	180	144	90	40	35	0.37
B0403F	6 Axi sensor	2700	5400	270	216	135	40	70	0.72
B0404F	6 Axi sensor	5400	10800	240	192	60	40	15	0.48
B0405F	6 Axi sensor	5400	10800	360	288	90	40	35	0.99
B0406F	6 Axi sensor	5400	10800	540	432	135	40	70	1.95
B0407F	6 Axi sensor	16200	32400	660	530	60	50	15	0.62
B0408F	6 Axi sensor	16200	32400	1000	800	90	50	35	1.3
B0409F	6 Axi sensor	16200	32400	1500	1200	135	50	57	2.9
B0410F	6 Axi sensor	48600	97200	3000	2400	90	75	33	2.2
B0411F	6 Axi sensor	48600	97200	4500	3600	135	75	57	5
B0412F	6 Axi sensor	145800	291600	13500	10800	135	120	47	7.4
B0413F	6 Axi sensor	145800	291600	13500	10800	135	120	47	7.4

5. Design

Built-In Capabilities
The Net F/T, DAQ F/T, Controller F/T, and TWE F/T each provide a variety of powerful functions:
Tool transformations  translate and/or rotate the F/T reference frame.
Demo software  allows configuration and basic data logging capabilities.
Biasing  provides a convenient way to offset tool weight.
Increased system throughput  is possible by reducing the number of axes of output. (Not applicable to the Net F/T or TWE F/T.)
Threshold detection  eases integration into industrial applications (Net F/T and Controller F/T only).
We are happy to work with your design needs - providing a custom design if warranted for varying capacities (between X-Y and Z), higher temperature capability, or OEM/private labeling if needed.

bransensor.en.made-in-china.com